Battery (Vehicle); Important Safety Notes - Mercedes-Benz CLA Operator's Manual

Stop after driving for approximately ten
X
minutes and check the tire pressure with
the tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving
characteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
Correct the tire pressure if it is still at least
X
130 kPa (1.3 bar/19 psi) (for the values,
see the Tire and Loading Information
placard on the driver's side B-pillar or tire
pressure table on the fuel filler flap).
To increase the tire pressure: switch on
X
the tire inflation compressor.
To reduce the tire pressure: depress
X
pressure release button : next to
pressure gauge ;.

Battery (vehicle)

To remove the tire sealant bottle from the
X
tire inflation compressor, press together
the locking tabs on the yellow cap.
Pull the tire sealant bottle out of the tire
X
inflation compressor.
The filler hose remains attached to the tire
sealant bottle.
Stow the tire sealant bottle and the tire
X
inflation compressor.
Drive to the nearest qualified specialist
X
workshop and have the tire changed there.
Have the tire sealant bottle and the filler
X
hose replaced as soon as possible at a
qualified specialist workshop.
Have the tire sealant bottle replaced every
X
four years at a qualified specialist
workshop.
Battery (vehicle)

Important safety notes

Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installing. You should therefore
have all work involving the battery carried out
at a qualified specialist workshop.
299
Z