Opening And Closing; Side Windows; Opening/Closing - Mercedes-Benz CLA Operator's Manual

Mercedes-benz cla
Hide thumbs Also See for CLA:
Table of Contents

Advertisement

take the SmartKey with you and lock the
vehicle. Never leave children unsupervised in
the vehicle.
Side window reversing feature
The side windows are equipped with an
automatic reversing feature. If a solid object
blocks or restricts a side window during the
closing process, the side window opens again
automatically. However, the automatic
reversing feature is only an aid and does not
relieve you of the responsibility of paying
attention when closing a side window.
G
WARNING
The reversing feature does not react:
to soft, light and thin objects, e.g. small
R
fingers
over the last 1/6 in(4 mm) of the closing
R
movement
during resetting
R
when closing the side window again
R
manually immediately after automatic
reversing
This means that the reversing feature cannot
prevent someone being trapped in these
situations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side
windows
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding side window.
The switches on the driver's door take
precedence.
Front left
:
Front right
;
Rear right
=
Rear left
?
i
When the override feature for the side
windows is activated (
windows cannot be operated from the rear.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open: press the corresponding switch.
X
To open fully: press the corresponding
X
switch beyond the point of resistance.
Automatic closing is started.
To close: pull the corresponding switch.
X
To close fully: pull the corresponding
X
switch beyond the pressure point.
Automatic closing is started.
To interrupt the automatic opening/
X
closing: press/pull the corresponding
switch again.
i
If you press the switch beyond the point
of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
i
You can continue to operate the side
windows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minutes or until the
driver's or front-passenger door is opened.

Side windows

page 61), the side
Y
Z
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents