Mercedes-Benz CLA Operator's Manual page 299

Immediately change out of clothing which
R
has come into contact with tire sealant.
If an allergic reaction occurs, seek medical
R
attention immediately.
Using the TIREFIT kit
TIREFIT is a tire sealant.
You can use TIREFIT to seal punctures of up
to 0.16 in (4 mm), particularly those in the tire
tread. You can use TIREFIT at outside
temperatures down to Ò4 ‡ (Ò20 †).
TIREFIT sticker, 2-part
Do not remove any foreign objects which
X
have penetrated the tire, e.g. screws or
nails.
Remove the tire sealant bottle, the
X
accompanying TIREFIT sticker and the tire
inflation compressor from the stowage well
underneath the cargo compartment floor
( page 294).
Y
Affix part : of the TIREFIT sticker within
X
the driver's field of vision.
Affix part ; of the TIREFIT sticker near the
X
valve on the wheel with the defective tire.
Remove filler hose B and plug = from the
X
bottom section of the tire inflation
compressor housing.
Slide the yellow filler hose connector into
X
the mounting on yellow cap A of tire
sealant bottle : until the plug engages.
With the sealing rings in front, slide yellow
X
cap A of tire sealant bottle : into the
mounting of tire inflation compressor ;
until the cap and both hooks engage.
Remove the cap from valve C on the faulty
X
tire.
Screw filler hose D onto valve.
X
Insert plug = into the socket of the
X
cigarette lighter ( page 262) or into a 12 V
Y
power socket in your vehicle (
Turn the SmartKey to position 1 in the
X
ignition lock ( page 137).
Y
Press on/off switch ? on the tire inflation
X
compressor to ON.
The tire inflation compressor is switched
on. The tire is inflated.
Flat tire
297
page 263).
Y
Z