Spektrum AR7100 Series User Manual page 4

EN
Features
• Regulated 5.2-voltage output to the Rudder, Gear, Aux 2 and Throttle
channels allowing the cyclic servos to be powered at high voltage for
increased performance while the gyro and throttle servos are powered
by the necessary compatible lower voltage (5.2V).
• AR7100R incorporates an integrated RevLimit limiter with backplate rpm
sensor offering the cleanest, easiest installation available.
• Easy-to-mount backplate RevLimit rpm sensor—with a single lead that
plugs into the receiver, eliminates the hassle of mounting magnets and
brackets as is the case for typical rpm sensors.
• Heavy-duty 16AWG input leads pre-wired with EC3 connector.
• Dual outputs on the Throttle and Aux 2 channels (regulated to 5.2 volts/
unregulated).
• One internal receiver and up to two remote receivers.
• Soft switch fails-on if the switch is damaged.
• Optional charge ON/OFF adaptor lead (included) allows charging,
battery monitoring and ON/OFF through one easily accessible lead.
• Two types of failsafe—SmartSafe (throttle only) and conventional
failsafe (all servos).
• Quick Connect - If a power interruption (brown out) occurs the system
reconnects in less than .25 seconds.
• Flight Log compatible.
4
• Compatible with all Spektrum and JR DSM2 full range
radio systems.
• 2048 Resolution
Note: The AR7100/AR7100R uses a specifically designed switch.
Conventionally wired switches are not compatible with the AR7100.
Spektrum AR7100