Spektrum AR7100 Series User Manual page 19

Modes of Operation (continued)
JR X9303 2.4GHz
®
If using the JR X9303 2.4GHz, the following is recommended.
In System mode under device, activate the limiter program by selecting
GOV under the Gear channel. The RevLimit will then be controlled and
adjusted via the Limiter screen located in function mode. A target rpm is
available for each flight mode. 0% turns off the limiter, while the larger the
value the higher the target rpm.
Note: The Gyro Gain channel will plug into the Gear channel and the gyro
screen will be used to adjust the gyro gain. (See the X9303 manual for
more detail on Gyro Gain settings.)
Spektrum AR7100
JR 12X 2.4GHz
®
If using the JR 12X, the following is recommended:
In System mode in code 17 Device Select, Assign the GOV to the gear
channel. This will activate the governor programming code 45 in the function
mode. The RevLimit will then be controlled and adjusted via the Governor
screen code 45 located in function mode. A target rpm is available for each
flight mode. 0% turns off the limiter, while the larger the value the higher the
target rpm.
EN
19