Contrast; Changing Fax Resolution - Brother MFC-6890CDW User Manual

Contrast

If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a
Press (Fax).
b
Press d or c to display Contrast.
c
Press Contrast.
d
Press Auto, Light or Dark.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.

Changing fax resolution

5
The quality of a fax can be improved by
changing the fax resolution.
a
Press
b
Press d or c to display
Fax Resolution.
c
Press Fax Resolution.
d
Press the resolution you want.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
Monochrome
Standard
Fine
S.Fine
Photo
Colour
Standard
Fine
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Sending a Fax
(Fax).
Suitable for most typed
documents.
Good for small print and
transmits a little slower than
Standard resolution.
Good for small print or artwork
and transmits slower than Fine
resolution.
Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission.
Suitable for most typed
documents.
Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
5
5
45