Switching Users; Changing To The Public Mode; Reset All Users - Brother MFC-6890CDW User Manual

Chapter 4

Switching users

This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
a
On the machine's control panel, hold
down Shift as you press l.
Or, on the LCD, press User: Public
or User: xxxxx (where xxxxx is the
user's name).
Then press Change User.
b
Press a or b to display your user name.
c
Press your user name.
d
Enter your four-digit PIN using the
buttons on the LCD.
Press OK.

Changing to the Public mode

a
Press User: xxxxx (where xxxxx is
the user's name).
b
Press Go to Public.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting. (See Mode Timer
on page 28.)
38

Reset all users

4
You can reset all settings and passwords for
the Public user and all restricted users.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display
Function Lock.
e
Press Function Lock.
f
Press Reset All Users.
g
Enter the administrator password using
the buttons on the LCD.
Press OK.
4 h
Press Yes for 2 seconds to confirm to
delete all restricted users.
i
Press Stop/Exit.
4