Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-6890CDW User Manual

5

Sending a Fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
FAX FAX
Fax Resolution Contrast
Standard Standard Auto Auto
History
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 45.)
Contrast (See page 45.)
Glass ScanSize (See page 41.)
Broadcasting (See page 43.)
Preview (See page 42.)
Delayed Fax (See page 46.)
Batch TX (See page 47.)
Real Time TX (See page 46.)
Polled TX (See page 86.)
Polling RX (See page 84.)
Overseas Mode (See page 46.)
Set New Default (See page 47.)
Factory Reset (See page 48.)
Press the option you want.
40
5
Glass ScanSize
A4 A4
Phone Book

Faxing from the ADF

a
Press (Fax).
b
Place the document face up in the ADF.
(See Using the ADF on page 24.)
c
Enter the fax number using the dial pad.
You can also enter the fax number on
the LCD by pressing Phone Book and
Send a fax, or you can press a
One Touch key on the machine's control
panel.
(For details, see How to Dial
on page 72.)
Note
• You can preview a fax message before
sending it by setting Preview to On.
(See How to preview an outgoing fax
on page 42.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See LDAP operation in the Network
User's Guide on the CD-ROM.)
d
Press Mono Start or Colour Start.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
• You can send a colour fax that is A4 size
or a mono fax that is A3 size.
5
5