Standard Horizon HX380 Owner's Manual page 4

Q
J
Connects to the sup-
plied CAT460 antenna.
The internal speaker is
located here.
[ ] S
Speak into the micro-
phone in a normal voice
level while pressing this
switch.
[ ] B
Press to recall chan-
nel 16.
Press and hold to re-
call channel 9.
[ ( )] B
Press to toggle the
transmit power be-
tween High (5W) and
Low (1W).
Press and hold to
lock and unlock the
keypad.
[ ] B
Press to toggle the
"PRESET" mode "on"
and "off".
Press and hold to
s a v e t h e c u r r e n t
c h a n n e l i n t o t h e
"PRESET" memory.
: Water resistance of the transceiver is assured only when the battery pack is at-
tached to the transceiver and MIC/SP cap is installed in the MIC/SP jack.
Page 4
R
J
Connects to a optional
Speaker/Microphone.
[ ] [ ] B
Selects the operating
channel.
Selects the item in the
"Setup Menu"
G
[ ] K
R o t a t e t h i s k n o b
clockwise to turn on the
radio, and adjust the
audio level.
The internal speaker is
located here.
When transmitting, po-
sition your mouth about
1.2 ~ 2.5 cm away from
the small mic hole.
[ ] B
Press this key first, then
press the [ ] key to
squelch or press the
[ ] key to un-squelch
the radio.
[ ( )] B
Press to start and
stop the scanning.
Press and hold to
watch the "Priority"
channel and the cur-
rent operating chan-
nel.
[ ] B
Press to stop the Scan
or Dual Watch feature.
HX380