Maintenance; General; Replacement Parts - Standard Horizon HX380 Owner's Manual

8. MAINTENANCE

8.1 GENERAL

The inherent quality of the solid-state components in STANDARD HORIZON
radios will provide many years of continuous use. Take the following precau-
tions to prevent damage to the radio.
To prevent corrosion of electrical contacts and keep the water resistance,
keep the microphone connected or the jack covered at all times.
Never key the transmitter unless an antenna or suitable dummy load is
connected to the antenna receptacle.
Ensure that the input voltage does not exceed the value specified in your
Owner's Manual.
Use only STANDARD HORIZON-approved accessories and replacement
parts.

8.2 REPLACEMENT PARTS

Occasionally an owner needs a replacement part. These can be ordered from
STANDARD HORIZON / Vertex Standard authorized dealers.
Commonly requested parts, and their part numbers are listed below.
CAT460 Antenna: Q3000176
VOL Knob: RA1193900
MIC/SP Rubber Cap: RA1194200
MIC/SP Plastic Cap: RA108700B
Belt Clip: RA060190A
Page 28 HX380