Dual Watch - Standard Horizon HX380 Owner's Manual

6.9 DUAL WATCH

The Dual Watch feature allows the radio watch the current channel and the
Priority channel.
1. To set the Priority channel, hold down the [ 16/9 ] key and press the
[ H/L ( )] key, described previously in section 6.8 sentence 1.
2. Select the desired channel using the [ ] or [ ] key.
3. Press and hold the [ SCAN ( DW )] key for two seconds
to activate the Dual Watch feature. A "DW" notation will
appear at the upper left corner of the display when the
Dual Watch feature is activated.
4. When a transmission is received on the "Priority" channel, the radio re-
ceives the "Priority Channel" until the incoming signal disappears.
5. When the radio receives a transmission on the working channel, the radio
will Dual watch between the working channel and Priority channel.
6. The Dual Watch feature will resume when the incoming signal disappears
at the end of the transmission.
7. To stop the Dual Watch feature and return to normal operation, press the
[ SCAN ( DW )] key briefly.
You may change the Dual Watch feature to "Tri" Watch via the Menu
("Set") Mode. The "Tri" Watch feature watches the activity of the CH16,
CH9, and the current channel. A "TW 16/9" notation will appear at the
upper left corner of the display when the Tri" Watch feature is activated.
Refer to Menu Mode Item "DUAL WATCH MODE" on page 25 for de-
tails.
HX380
NOTE
Page 23