Standard Horizon HX380 Owner's Manual page 26

CH NAME
Function: Changes the channel name shown on the dis-
play.
To change the channel name:
1. Select the channel on which you wish to change the
name before recalling this Menu item.
2. Turn the transceiver off.
3. Hold down the [ SQL ] key, then turn on the transceiver while still holding
down the [ SQL ] key.
4. Press the [ ] or [ ] key to select this Menu item "CH NAME".
5. Press the [ SQL ] key. The current channel name will appear at the upper
left corner of the display.
6. Press the [ ] or [ ] key to select the first character (letter, number, or
symbol) in the name you wish to change, then press the [ SQL ] key to
move to the next character.
7. Repeat step 6 as many times as necessary to complete the name tag (up
to 12 characters).
8. After completing your adjustment, press the [ CLR ] key to save the new
setting.
9. Press the [ H/L (
SCAN TYPE
Function: Selects the Scan range.
Available Values: PrE (PRESET Channel) / ALL (All Chan-
nel)
Default: PrE (PRESET Channel)
PrE (PRESET Channel): The radio scans the Preset channel only.
ALL (All Channel):
Page 26
)] key to exit to normal operation.
The radio scans the all Marine channels.
HX380