Standard Horizon HX380 Owner's Manual page 25

DUAL WATCH MODE
Function: Selects dual or tri-watch as desired.
Available Values: t- (Tri Watch) / d- (Dual Watch)
Default: d- (Dual Watch)
t- (Tri Watch):
d- (Dual Watch): The radio watches the the activity of the current channel and
DIMMER MODE
Function: Selects the display brightness level.
Available Values: 0 / 1 / 2 / 3
Default: 3
DUAL WATCH DISPLAY
Function: Selects the display mode while Dual Watch scan-
ning.
Available Values: nor (Normal) / SPC (Special)
Default: nor (Normal)
When this menu is set to "Normal", the channel numbers during dual watch will
be shown scrolling on the display. When "Special" is selected the channel
numbers on the display do not change unless a call was received. The chan-
nel shown is the last channel that was received. This is a handy feature if you
cannot look at the radio the moment a transmission was received.
SCAN DISPLAY
Function: Selects display mode while scanning.
Available Values: nor (Normal) / SPC (Special)
Default: nor (Normal)
When this menu is set to "Normal", the channel numbers
during dual watch will be shown scrolling on the display.
When "Special" is selected the channel numbers on the display do not change
unless a call was received. The channel shown is the last channel that was
received. This is a handy feature if you cannot look at the radio the moment a
transmission was received.
HX380
The radio watches the activity of the
CH16, CH9, and the current channel.
the Priority channel.
Page 25