Network Setup - Kodicom KSR816 User Manual

1. KSR816 Guide
7. System Setup
7.5.5 Spot O O u u t t /Camera link
[Figure 7-64. Spot/Camera link]
[Figure 7-65. Spot/Camera link setup]
6 8
�[Spot 모니터 출력/카메라 연동] 메뉴는 Spot
모니터에 나올 카메라를 선택하고 설정할 수
있습니다.
[카메라]
�선택된 카메라에 대하여 연동 시킬 Spot 모니터
를 선택할수 있습니다.
[카메라]
�Spot 모니터에 연동할 카메라를 선택합니다.
�Spot 1~4번은 연동하려는 카메라 중에서
하나 씩만 선택할 수 있습니다.
�Spot-out 5는 무조건 16분할 화면으로 Spot
모니터에 출력합니다.

7.6 Network Setup

�Set the network for communicating with the center program using the [Network Setup] menu. To notify the
administrator in a remote location of any emergency through e-mail, set the emergency warning function.
[Figure 7-66. Network Setup Screen]
[Network]
�The system supports network connection
through LAN using IP address, as well as
DHCP, ADSL, and modem.(Modem set up
not available in Europe)
�Select the network option you wish to use by
mouse or the jog/shuttle.
�LAN is the standard network connection for
KSR816.
[ID/PASSWORD]
�Logging in ADSL require ID / PASSWORD.
[ S i t e I P ]
�Enter the system's IP address for connecting
KSR816 to a remote Center via LAN(see page
66 for details.)
6 9
1. KSR816 Guide
7. System Setup
[Subnet Mask]
�You can enter the system's subnet mask
in order to communication with the
Center program when connected
through LAN.
[Gateway]
�You can enter the system's geteway
address in order to communication
with the Center using LAN.
[Emergency Warning]
�
In case of an emergency, emergency images are
immediately sent to a remote location or through e-
mail.
�
To send emergency images to a remote location,
set the network address where the center program
is installed.
� To send emergency images to the administrator'
s mail address, set the SMTP mail server address,
sender' s mail address, and recipient' s mail
address.