Step 11 Connect Water Supply; Step 12 Connect Power - GE Monogram ZFGP21HYASS Installation Instructions Manual

Stainless steel free-standing, drawer freezer refrigerator
Hide thumbs Also See for Monogram ZFGP21HYASS:
Table of Contents

Advertisement

Installation
Instructions
ISTEP lOAf WATER LINE
INSTALLATION
WITH
A REVERSE OSMOSIS
SYSTEM
Skip this step when not using RO Sgstem.
If the woter supply to the refrigerotor is from o Reverse
Osmosis Woter System, use the refrigerotor's filter
byposs plug.
You must olso use the filter byposs plug when
o replocement filter cortridge is not ovoiloble.
The icemoker will not operote without the filter
or filter byposs plug.
Replacement
Filters:
To order additional
filter
cartridges
in the United
States, visit our Website,
ge.com,
or call GE Parts
and Accessories,
800.626.2002.
Filter Model GSWF
Customers in Conodo should consult the yellow poges
for the neorest Mobe Service Center.
STEP 11 CONNECT WATER SUPPLY
Check to be sure thot refrigerotor power cord is not
plugged into the woll outlet.
Tubing Clamp-_
1/4"
Compression N ut
Ferrule
(sleeve)
1/4"Tubing
Refrigerator Conni_ction
SmartConnect TMTubing
If you are using copper tubing:
• Ploce compression nut ond ferrule (sleeve)onto
the end of the tubing coming from the house woter
supply.
• Insert the end of the copper tubing into
the refrigerotor connection ot the bock
of the refrigerotor, os for os possible.
Hold the tubing in ploce ond tighten the fitting.
If gou are using GE SmartConnect T° t ubing:
• Insert the molded end of the tubing into
the refrigerotor connection, ot the bock of
the refrigerotor, ond tighten the compression
nut until it is hond tight.
• Then tighten one odditionol turn with o wrench.
Overtightening moy couse leoks.
• Fosten the tubing into the clomp provided to hold it
in position. You moy need to pry open the clomp.
• Turn on the woter ot the shut-off volve to check
for leoks.
STEP 12 CONNECT POWER
• Connect refrigerotor power cord plug to o properly
grounded receptocle.
• Check to moke sure power to refrigerotor is on by
opening refrigerotor door to see if interior lights
ore on.
iSTEP 13i MOVE REFRIGERATOR
INTO POSITION
• Remove outside protective wropping.
• Move the refrigerotor into finol instollotion position.
• Remove door spocer, if not removed eorlier,
ond oil inside pockoging.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents