Table of Contents
Advertisement
Installation
Instructions
[STEP 16] INSTALL TOEKICK
• Presstoekick into position and reinstall one screw on
each side.
\,
Toekick Screw
IMPORTANT:
The ventedtoekick m ust
remain unobstructed for proper air circulation.
iSTEP 18 i TEMPERATURE CONTROLS
• The temperature controls ore preset at 37°F
for the refrigerator and O°Ffor the freezer.
• Allow 24 hours to stabilize before making adjustments.
[STEP 17] REMOVE PACKAGING
START ICEMAKER
_b__
Power S witch
A. Remove all tape, foam and protective packing from
shelves and drawers.
B. Remove the tie downs from the freezer baskets.
Set the icemaker power switch to the I (on) position.
The icemaker will not begin to operate until it reaches
its operating temperature of 15°F (-9°C) or below. It will
then begin operation automaticallg. It will take 2-3 dags
to fill the ice bin.
NOTE:In lower water pressure conditions, the water
valve mag turn on up to 3 times to deliver enough water
to the icemaker.
14
Hide quick links:
Advertisement
Table of Contents
