Collect Materials And Tools - Intergraph Intense 3D Pro 3410 Installation Manual

6
Touch the metal chassis of the computer to drain off any static
‹
electricity before touching a card.
Wear a properly connected grounding wrist strap when handling a
‹
card or working in a computer.
Do not wear wool or polyester clothing.
‹
Work in an area with a relative humidity of at least 50 percent.
‹
Do not remove a card from its antistatic bag until you are ready to
‹
install it.
Handle a card as little as possible and by the edges only.
‹

Collect Materials and Tools

Collect the following materials and tools:
One Intense 3D Pro Graphics accelerator. Either the Intense 3D Pro
‹
3410T accelerator or the Intense 3D Pro 3400T accelerator.
If the graphics is the Intense 3D Pro 3410GT or Intense 3D Pro
‹
3400GT then also include one Intense 3D Pro 3410G Geometry
Accelerator. It includes a wide ribbon cable identified as the Vertex
Bus cable that connects the Graphics and Geometry accelerators
together.
Diskette containing the Intense 3D Pro Graphics Video display
‹
driver.
Phillips screwdriver to prepare your computer's expansion slot(s)
‹
for installation of the Graphics accelerator and possibly the optional
Geometry Accelerator card.
Monitor cable supplied with your computer or with the monitor.
‹
Your computer's documentation.
‹
Retain all packaging materials. You must return your Intense 3D Pro Graphics
hardware in its original packaging to obtain warranty service.
Make a Copy of the Video Display Driver Diskettes
Make a copy of the diskettes containing the Intense 3D Pro Graphics Video
display driver as a precaution. Should anything happen to the copy, you will still
have the original diskettes.