Intergraph Intense 3D Pro 3410 Installation Manual page 19

To verify the default video display driver:
1. From the operating system Start menu, go to Settings/Control
Panel/System.
2. On the Startup/Shutdown tab, verify that Windows NT Workstation
Version 4.0 is selected in the Startup list. If it is not, select it from
the list and click Apply.
NOTE Do not select the VGA version of the operating system. The video
display runs in VGA mode when the Intense 3D Pro driver is not
running.
3. Click OK to close the System dialog.
4. Click Display in the Control Panel.
5. Click the Settings tab.
6. Click the Display Type button.
7. Under Adapter Type verify Intense 3D Pro is present. This
indicates the driver is installed for Intense 3D Pro Graphics.
8. Click the Cancel button. No changes will occur.
9. Click the Cancel button to close the Display Properties menu.
17