Intergraph Intense 3D Pro 3410 Installation Manual page 6

Support for industry standard and Dell multi-sync monitors.
‹
Hardware support for Display Data Channel (DDC).
‹
Support for optional hardware geometry acceleration
‹
Intense 3D Pro Graphics Hardware Requirements
This section will define the hardware requirements necessary to install and use
the Intense 3D Pro Graphics Series.
Intense 3D Pro Graphics hardware requires the following expansion slots based
on the specific graphics accelerator:
Name Includes
Intense 3D Pro 3410T Graphics Accelerator
Intense 3D Pro 3410GT Graphics Accelerator
+ Geometry
Accelerator
Intense 3D Pro 3400T Graphics Accelerator
Intense 3D Pro 3400GT Graphics Accelerator
+ Geometry
Accelerator
Intense 3D Pro 3410G Geometry Accelerator
(Optional Upgrade for
3410T and 3400T only)
Upgrading Later With the Intense 3D Pro 3410G
Geometry Accelerator
If the Intense 3D Pro Graphics designation does not have the letter 'G' in it then it
doesn't include the optional Intense 3D Pro 3410G Geometry Accelerator. It is
possible to purchase the Geometry Accelerator at a later time and thereby
increase the performance of your graphics system.
The Geometry Accelerator is a Dell Installed graphics option. Contact Dell for
more information on purchasing. Refer to Intense 3D Pro 3410G when inquiring.
Intense 3D Pro Graphics Software
Intense 3D Pro Graphics use the Intense 3D Pro Video Display driver. The video
display driver installs as a standard Windows NT driver and provides both
GDI and OpenGL graphics compatibility.
3
Expansion Slots
Needed
One AGP slot
One AGP slot + One
PCI slot adjacent to the
AGP slot
One PCI slot
One PCI slot + One PCI
slot adjacent to the PCI
slot
One PCI slot adjacent to
the Graphics
Accelerator