Connectors - Advantech FPM-2150 Series User Manual

1.5 Connectors

The following connectors are situated on the bottom of the FPM-2150
Series:
VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external 15-
pin DB-15 connector locatd on the left side of the system unit.
Keyboard & mouse Connector (PS/2)
There are two PS/2 connectors which can be connected to a keyboard or
mouse.
Touchscreen Connector (DB-9) (optional)
This connector will only be present if a touchscreen is installed. It must
be connected to the RS-232 port of the PC. The touchscreen cable is
included with all orders that include the touchscreen option.
DC 12V Power In
This connector will be connected to the DC 12V Switching Power Sup-
ply.
Warning:
Before you connect a VGA cable between FPM-2150 and a PC, please
note the following issues.
1. If you have installed a operating system in the PC, make sure the ver-
tical frequency falls within the acceptable range. (Refer to Appendix
B)
2. If you have not installed a operating system, you have to adjust the
vertical frequency to fall within the range.
FPM-2150 Series User Manual 4