CLI Management
The system supports console management—CLI command. After you log in to the
system, you will see a command prompt. To enter CLI management interface, enter
―enable‖ command. The following table lists the CLI commands and description.
Commands Level
Modes
Begin a
User
session with
EXEC
your switch.
Enter the
enable
Privileged
command
EXEC
while in user
EXEC mode.
Access
Prompt
Method
switch>
switch#
CLI command interface
Exit
Method
Enter
logout or
quit.
Enter
disable to
exit.
18
About This Mode1
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system
information.
The privileged
command is in
advanced mode
Privileged this mode
to