Related Manuals for Lantech mini Switch 800
Summary of Contents for Lantech mini Switch 800
-
Page 1: User Guide
Switch 800 mini 8 Port 10/100 Base-TX Switch with Auto MDI/MDI-X User Guide Rev. 1.0 June, 2003... - Page 2 Fast Ethernet switching function that allows high-performance, low-cost connection. Mini Switch 800 will automatically detect the speed of the device that you plug into it to allow you to use both 10 and 100Mbps device. It features a store-and forward switching and it can auto-learn and store source address.
-
Page 3: Package Contents
- Rubber Feet - DC power Adapter - User’s Guide Figure 1-2. Package Contents Compare the contents of your Mini Switch 800 with the standard checklist above. If any item is missing or damaged, please contact your local dealer for service. -
Page 4: Hardware Description
User Guide 2. Hardware Description This section mainly describes the hardware of the Lantech Mini Switch 800 The physical dimensions of the 8-Port Switch is: 165mm(W) X 86mm(D) x 23mm(H) •Front Panel The LED indicators are located on the frond panel of the Switch. They provide a real-time indication of systematic operation status. -
Page 5: Rear Panel
Switch 800 •Rear Panel The Rear Panel of the Mini Switch 800 consists of 8x 10/100 N-Way UTP switch ports, and one DC power connector. DC 7.5V Figure 2-2. The Rear Panel of the 8-Port Switch - RJ-45 Ports: 8x 10/100N-Way auto-sensing for 10Base-T or 100Base-TX connection. -
Page 6: Network Application
•Stand Alone The Mini Switch 800 is designed to be a compact desktop size switch, which is an ideal solution for small workgroup. The Switch can be used as a standalone switch to which personal computers, server, printer server are directly connected to form small workgroup. - Page 7 Switch 800 •Enlarge Your Network You can use Uplink port of the Mini Switch 800 to connect with another hub or switch to interconnect each of your small switched workgroup to form a large switched network. You can connect anyone switch port to hub or switch without crossover cable by the Auto MDI/MDI-X function.
-
Page 8: Troubleshooting
User Guide 4. Trouble Shooting The Mini Switch 800 can be easily monitored through panel indicators to assist in identifying problems. This section describes common problems you may encounter and where you can find possible solutions. •Diagnosing LED Indicators If Link indicator does not light up after making a connection, you may check whether network interface (e.g., a network adapter card on the... -
Page 9: Technical Specification
Switch 800 5.Technical Specification This section provides the specifications of the Mini Switch 800 : •Specification Standards Compliance IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet ANSI/IEEE standard 802.3 N-Way auto-negotiation Protocol CSMA/CD Max Forwarding Rate 14,880 pps Ethernet port,... - Page 10 User Guide • Federal Communications commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to pro reasonable protection against harmful interference in a residential installation.
- Page 11 Switch 800...
- Page 12 3F, No.8, Lane 345, Yang-Kuang St., Nei-Hu Dis., 114, Taipei, Taiwan, R.O.C. tel: +886-2-2659-1800 fax: +886-2-2659-1801 e-mail: service@mail.lantech.com.tw http://www.lantech.com.tw...