Introduction; Materials - Network Technologies XTENDEX Series Installation And Operation Manual

NTI XTENDEX DVI Video Extender

INTRODUCTION

The XTENDEX Series CAT5 DVI Video Extender (XTENDEX) is designed to enable the video output from one digital video
source to be viewed by two users, one local and one remote.
from a CPU via Category 5/5e/ or 6 (CAT5) twisted-pair cable. The local user monitor will be located near the video source CPU.
The XTENDEX Series Extender is extremely simple to install and has been thoroughly tested to insure reliable performance.
Through the use of CAT5 cable it is possible to economically increase the flexibility of a computer system. Here are some of the
features and ways this can benefit any workplace:
• Allows the placement of a DVI-enabled monitor in a location where only these parts are needed without having the video
source there too, taking up valuable space
• Allows DVI video to be viewed by both a local and remote user (up to 150 feet away)
• Provides crisp and clear resolution up to 1920 x 1200 @ 100 feet (see page 7 for more details)
• Video quality, for varying lengths of cable, is automatically adjustable providing optimum image quality
• Transmits single link DVI-D signal over two CAT5 cables.
• Built-in surge protection.
• Only one power supply is necessary to power both the Local and Remote units.
• Supports local and remote DVI monitors.
• Compatible with DDWG DVI standard.
• HDCP Compliant
• Supports the DDC2B protocol.

MATERIALS

Materials Included with this kit:
NTI XTENDEX Local Unit
NTI XTENDEX Remote Unit
DVI-D-MM-S-2M 2 meter male-male DVI video cable
120VAC or 240VAC at 50 or 60Hz-5VDC/2.0A AC Adapter
This owner's manual
Additional materials may be required but are not supplied:
CAT5 unshielded twisted-pair cables terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg. 8 for
proper EIA/TIA 568 B wiring method)
DVI male-male cables to connect the monitor(s) to the Remote and Local units (Order NTI # DVI-IS-xx-MM where x=3, 6, or
10 foot cable). Both DVI-I and DVI-D type cables can be used for this connection.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.
The remote monitor can be located as much as 150 feet away
1