Table of Contents
Advertisement
S
S
UPER
ERVER 6016T-MR User's Manual
1-2
Serverboard Features
The X8DTL-i is a dual processor serverboard based upon Intel's 5500 + ICH10R
chipset. Below are the main features of the X8DTL-i.
Processor
The X8DTL-i supports single or dual two Intel® 5600/5500 Series processors in
LGA1366 sockets. Please refer to our web site for a complete listing of supported
processors (www.supermicro.com).
Memory
The X8DTL-i has six 240-pin DIMM slots that can support up to 48 GB of ECC
registered or 24 GB of unbuffered DDR3-1333/1066/800 SDRAM.
Serial ATA
An on-chip (ICH10R) SATA controller is integrated into the X8DTL-i to provide a
six-port, 3 Gb/sec SATA subsystem, which is RAID 0, 1, 5 and 10 supported. The
SATA drives are hot-swappable units. For more information on SATA HostRAID
confi guration, please refer to the Intel SATA HostRAID User's Guide posted on our
website at http://www.supermicro.com/support/manuals/.
Note: You must have RAID set up to enable the hot-swap capability of the SATA
drives.
PCI Expansion Slots
The X8DTL-i has two PCI Express 2.0 x8 slots, one PCI Express 2.0 x4 slot, one
PCI Express x4 slot and two PCI 33 MHz slots. One of these slots may be popu-
lated with a PCI-E x16 riser card (included) to support a PCI expansion card with
a PCI-E x8 signal.
Backpanel Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports,
PS/2 mouse and keyboard ports and two Gigabit LAN (NIC) ports. A UID button is
also included on the backpanel.
1-2
Advertisement
Table of Contents
