Supero SUPERSERVER 6016T-MR User Manual page 82

Table of Contents

SUPERSERVER 6016T-MR User's Manual

IDE/SATA Conﬁ guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE devices and displays the following items:

SATA#1 Conﬁ guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-

lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,

Compatible and Enhanced.

Conﬁ gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options

are IDE, RAID and AHCI. (When RAID is selected, the items: "AHCI CodeBase"

and "ICH RAID Code Base" will appear. When AHCI is selected, the item "AHCI

CodeBase" will be available.)

AHCI CodeBase (Available when RAID or AHCI is selected)

Select BIOS Native Module to use the BIOS Native Module for AHCI In-

terface (Advanced Host Controller Interface). Select Intel AHCI ROM to

use the Intel AHCI ROM for AHCI Interface. (Take caution when using this

function. This feature is for advanced programmers only.) The options are

BIOS Native Module and Intel AHCI ROM. If the item is set to "IDE", the

following item will display.

ICH RAID Code Base (Available when the option-RAID is selected)

Select Intel to enable Intel's SATA RAID ﬁ rmware to conﬁ gure Intel SATA

RAID settings. Select Adaptec to enable Adaptec's ﬁ rmware to conﬁ gure

Adaptec SATA RAID settings. The options are Intel and Adaptec.

SATA#2 Conﬁ guration (Available when the option "IDE" is selected)

Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,

and Enhanced.

IDE Detect Timeout (sec)

Use this item to set the timeout value for the BIOS to detect the ATA, ATAPI devices

installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35.

Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,

and Fourth IDE Master

These settings allow the user to set the parameters of the slots indicated above.

Press <Enter> to activate the following submenu. Set the correct conﬁ gurations

accordingly. The items included in the submenu are listed below.

7-12

Table of Contents