Supero SUPERSERVER 6016T-MR User Manual page 85

Chapter 7: BIOS
PCI Latency Timer
This feature sets the latency Timer for each PCI device installed on a PCI bus.
Select 64 to set the PCI latency Timer to 64 PCI clock cycles. The options are 32,
64, 96, 128, 160, 192, 224 and 248.
PCI IDE BusMaster
When this item is enabled, the BIOS uses PCI bus mastering for reading/writing to
IDE drives. The options are Disabled and Enabled.
SR-IOV Supported
Single Root I/O Virtualization is an industry-standard mechanism that allows devices
to be shared simultaneously among several virtual machines. SR-IOV is capable
of partitioning a PCI function into several virtual interfaces in order to share the
resources of a PCI Express (PCIe) device under a virtual environment. The options
are Disabled and Enabled.
Slot 1 PCI 33MHz, Slot 2 PCI 33MHz, Slot 3 PCIE x4 in X8 Slot, Slot 4 PCIE
x8, Slot 5 PCIE x4 in x8 Slot, Slot 6 PCIE x8 in x16 Slot
This feature allows you to Enable or Disable any of the PCI slots. The options are
Enable and Disable.
Onboard LAN Option ROM Select
Select iSCSI to use iSCSI Option ROMs to boot the computer using a network
device. Select iSCSI to use PXE Option ROMs to boot the computer using a
network device. The options are iSCSI and PXE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable Onboard LAN1/LAN2 Option ROM which will allow
you to boot computer using a network connection. The options are Enabled and
Disabled.
Load Onboard SAS Option ROM (Available when SAS is enabled on the
X8DTL-3/-3F)
Select Enabled to enable Onboard SAS Option ROM which will allow you to boot
computer using a SAS connection. The options are Enabled and Disabled.
Boot Graphics Adapter Priority
This option allows the user to specify which graphics controller to be used as the
primary boot device. The options are Onboard VGA and Offboard VGA.
7-15