Table of Contents
Advertisement
to keep Console Redirection active during POST and Boot Loader. The options
are Disabled, Boot Loader, and Always.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirec-
tion. The options are ANSI, VT100, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard defi nition that provides a way to send commands from a remote
console. The options are Enabled and Disabled.
Sredir Memory Display Delay
This feature defi nes the length of time in seconds to display memory information.
The options are No Delay, Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
Hardware Health Event
This feature allows the user to monitor system health and review the status of each
item as displayed.
CPU Overheat Alarm
This option allows the user to select the CPU Overheat Alarm setting which de-
termines when the CPU OH alarm will be activated to provide warning of possible
CPU overheat.
Warning! 1.Any temperature that exceeds the CPU threshold tempera-
ture predefi ned by the CPU manufacturer may result in CPU overheat or
system instability. When the CPU temperature reaches this predefi ned
threshold, the CPU and system cooling fans will run at full speed. 2. To
avoid possible system overheating, please be sure to provide adequate
airfl ow to your system.
The options are:
•
The Early Alarm: Select this setting to trigger the CPU overheat alarm (including
the LED and the buzzer) as soon as the CPU temperature reaches the CPU
overheat threshold as predefi ned by the CPU manufacturer.
•
The Default Alarm
cluding the LED and the buzzer) when the CPU temperature reaches about 5
above the threshold temperature as predefi ned by the CPU manufacturer to give
the CPU and system fans additional time needed for CPU and system cooling.
In both the alarms above, please take immediate action as shown below.
Monitoring
: Select this setting to trigger the CPU overheat alarm (in-
7-17
Chapter 7: BIOS
o
C
Advertisement
Table of Contents
