Table of Contents
Advertisement
Trusted Computing (Available when a TPM device is
detected and the TPM jumper is enabled)
TCG/TPM (Trusted Platform Module) Support
Select Yes on this item and enable the TPM jumper on the motherboard to enable
TCG (TPM 1.1/1.2)/TPM support in order to improve data integrity and network
security. The options are No and Yes. If this feature is set to Yes, the following
items will display:
Indicate Physical
Select Yes for the BIOS to show if a TPM Physical device is present. The options
are No and Yes.
TPM Deactivated
Select Set to disable TPM support. Select Clear to enable TPM support. Select
Don't Change to keep the current TPM support setting. The options are Don't
change, Set, and Clear.
TPM Owner
Select Don't Change to keep the current TPM Owner setting. Select Enable Install
to add a user to the TPM Owner account. Select Disable Install to prevent a user
from adding a TPM Owner account. Select Clear to remove a user from the TPM
Owner account. Select Don't Change to keep the current TPM Owner setting. The
options are Don't change, Enable Install, Disable Install, and Clear.
TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.
IPMI Confi guration (For X8DTL-3F/iF only)
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
IT administrators can use to monitor system health and to manage the system as a
whole. For details on IPMI, please visit Intel's website at www.intel.com.
IPMI Firmware Revision: This item displays the current IPMI fi rmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between system
management software and platform hardware. This feature displays the status code
of the BMC controller.
7-21
Chapter 7: BIOS
Advertisement
Table of Contents
