Adjusting Backrest Angle; Illustration 5 - Backrest Adjustments; Adjusting Seat Swivel Position; Illustration 6 - Seat Swivel Locking Lever - Rascal 600T Owner's Manual

Adjusting Backrest Angle

The seat is designed with five available backrest settings
(90°, 95°, 100°, 105° and 115°) to allow you to adjust the
angle of the back of your seat. The 90° setting provides
the most upright position and the 115° setting is the most
reclined. Adjustment locations are shown in Illustration 5.
The wrench and allen key that come with the scooter is
used in these adjustments.
To adjust the backrest angle:
1. Remove the nut and bolt on the hinge using the
supplied wrench and allen key.
2. Reinstall the hardware into the desired seat back
angle setting.
3. Choose the position that is most comfortable for the
user or as recommended by a seating professional.
4. Be sure to set both sides in the same position.

Adjusting Seat Swivel Position

The seat locking lever (located on the side of the seat)
allows you to swivel your seat and lock it in at 45°
increments. This locking lever is shown in Illustration 6.
You may use this feature to make it easier to transfer in
and out of the seat. To change seat positions:
• Actuate the seat locking lever.
• Swivel the seat to the position you desire.
• Release the lever.
Caution: After releasing the lever, turn the seat back and
forth slightly to ensure the lever is locked into position.
Rascal R600 Scooter Owner's Manual
EMC Part: 19271200 • Rev. 03 • 06/01/2003
14
105°
100°
Illustration 5 — Backrest Adjustments
Illustration 6 — Seat Swivel Locking Lever
95°
95
105
100
115
115°
90
90°
19271200/5
SEAT
LOCKING
LEVER
19271200/6