Compass Time-Out - WayFinder z250 Operation Manual

BASIC MODE HEADER
90 or OFF. Stop at your desired selection
for the compass time-out.
6. Press the ENT button once to set your
selected time-out and "C" and the select
time-out value should flash.
7. Press ADV twice to exit out of
programming mode. The display should
now be in Basic mode.
While in programming mode, you can
also set your backlight time-out. See the
Backlight Automatic Shut-Off section.
If at any time during programming no
button is pressed for 30 seconds, the
unit exits out of programming mode.
Backlight Automatic Shut-Off
The Wayfinder has a programmable time-out
for the backlight. The default shut-off value
is 10 seconds, meaning that after 10 seconds
the backlight will turn off. The shut-off can
be set at 10, 30, or 60 seconds. You may also
choose never have the backlight shut-off by
selecting "OFF". The backlight can be turned
off at anytime by pressing both the ADV and
ENT buttons simultaneously.
The backlight uses significantly more power
than the compass itself, therefore it is
recommended the backlight be turned off
when it is not needed.
13