WayFinder z250 Operation Manual page 13

BASIC MODE
HEADER
When to Calibrate :
The Wayfinder must be calibrated when:
1. It is being used for the first time.
2. It is being used in a different location
than it was previously calibrated in.
3. The "DISTORTION" icon displays con-
tinuously.
4. The battery is removed or replaced.
Steps to Calibrate :
1. Press ADV until the "BASIC" icon is
displayed in the upper right corner.
2. Press and hold ADV and "CAL" will
flash. This indicates you are now in
Calibration.
3. Press ENT,
momentarily flash. Then the message
"TURN TWICE" will blink in the lower
right corner of the display.
4. With the compass mounted in your
vehicle, drive in two complete circles
and then press ENT. Calibration is
now complete and the compass heading
should be displayed.
The size of the circles, and the direction
your vehicle is pointing when beginning
or ending the circles does not matter.
11
the backlight will