WayFinder z250 Operation Manual page 11

INSTALLING THE WAYFINDER
allows the compass to be gently pulled out
of the bracket. Removing only the compass
and not the bracket assures the compass will
be mounted in the same location as it was
previously. When reinstalling the compass,
make sure the angle of the Wayfinder in the
bracket is the same as it was before iremoval in
order to avoid recalibrating the unit.
The Wayfinder must be calibrated upon
initial use, as well as recalibrated
anytime the compass has been moved
to a different location or the angle
adjusted.
Do not leave the Wayfinder in a parked
vehicle that is likely to be exposed to
extremely hot or cold temperatures.
9