Modes, Buttons And Display - WayFinder z250 Operation Manual

MODES, BUTTONS AND DISPLAY

Modes
The Wayfinder Z250 has 2 modes:
1. Basic compass: In this mode, cardinal point
and numeric heading readouts appear. The
"BASIC" icon also appears in the upper
right corner.
2. Timer: In this mode, cardinal point, timer,
and numeric heading readouts appear.
There is no icon showing for this mode.
Buttons
ADV Button (Advance)
Press ADV to turn the Wayfinder on or to
change from Basic mode to Timer mode.
ENT Button (Enter)
Press ENT to select an option or value;
to begin/end calibration; to start/stop the
timer.
Display
Numeric Heading Readout
Heading is displayed in 1° increments from
0° to 359°.
Cardinal Points Readout
Heading is displayed in one of 8 cardinal
points (N, NE, E, SE, S, SW, W, NW).
3