Resetting The Wayfinder - WayFinder z250 Operation Manual

RESETTING THE WAYFINDER

Resetting the Wayfinder
A manual reset has been added to the Way-
finder. Resetting the unit erases everything
that is stored in memory including calibra-
tion, the automatic shut-off values, and timer
settings. Resetting the Wayfinder should only
be done when you want to completely erase
the memory.
To reset the Wayfinder:
1. Press and hold ADV and ENT at the
same time for 10 seconds and "rESET"
should flash.
2. Press the ENT button to reset the
compass. All the segments on the display
will briefly illuminate. The Wayfinder
must now be recalibrated.
3. If you decide not to reset the compass,
press the ADV button to exit reset
mode.
4. If "rESET" flashes for 30 seconds and
neither button is pressed, the Wayfinder
will exit reset mode and nothing will be
erased.
6