Controls At A Glance; Buttons And Icons - WayFinder V2000 Operation Manual

CONTROLS AT A GLANCE

"DISTORTION" Cardinal Point
Icon
Compass Rose
Bearing Point Readout
Compass Front
Battery
Compartment
Temperature
Sensor Jack
Compass Back
Numeric Heading
Readout Readout
Temperature and
Photo Diode
12-Volt Power
AdapterJack
The screen shows your heading in
one of 16 cardinal points (N, NNE,
NE, etc.), and an arrow on the com-
pass rose points toward that direction.
Plus, your precise heading is shown
numerically in increments of 5°.

Buttons and icons

Light button: Press
backlight on or off, or hold for two sec-
onds to adjust the auto shut-off interval.
Cal button: Press or hold
Buttons
begin calibration.
Temp button: Press
the temperature, or hold to select
Fahrenheit or Celsius.
Point button: Press
stored bearing point, or hold to store a
new bearing.
Power button: Press
the Wayfinder V2000 on or off.
"Distortion" icon: Indicates that mag-
netic interference is compromising com-
pass accuracy, or that the battery has been
changed and calibration is required.
4
to switch the
to
to display
to display a
to switch