User Set Mode (16-Key & 4-Key Versions) - Vertex Standard VX-920 Series Operating Manual

The VX-920/-970 Series includes a "User Set
(Menu)" Mode which allows the user to define or
configure various settings, such as Beep On/Off,
Squelch, LCD contrast, etc. To activate the "User
Set (Menu)" Mode:
Press the assigned programmable key for the
"SET" function to enter the "User Set Mode."
Select the User Set Mode Item you want change
using the CH selector knob.
Press the MONITOR/LAMP buttons to select
the status of the selected item.
Rotate the CH selector knob one click to save
the new setting.
Press PTT switch to exit to normal operation.
26
U S M
SER ET ODE
( 16-K
& 4-K V
EY EY ERSIONS
D D
ISPLAY ESCRIPTION
1 SQL Select the Squelch Threshold Level
2 SCN List Select the Scan List "User" or "Dealer"
3 BEEP Set the Beep On/Off
4 BELL Set the Bell On/Off
(Bell engaged by sub-audible CTCSS/DCS)
5 Lighting Set the BUSY/TX LED On/Off
6 Lock Set the Lock function to be Locked
(Key/PTT/Key+PTT)
7 Group Set the Operation Group
8 SCAN Set the Scan status
(same function as Scan key)
9 DW Set the Dual Watch status
(same function as DW key)
10 TA Set the Talk Around status
(same function as TA key)
11 AF MinVR Set the Minimum Volume level
12 Beep VR Set the Beep volume level
13 Contrast Set the LCD contrast
14 Pitch Select the Special Receive Audio Response
15 REC Mode ONE: Enables recording one message (max.
ROL: Enables recording whenever squelch
16 Play Mode Set the priority audio on playback mode.
PLY: Playback audio is higher priority than re-
SIG: Received signal is higher priority than
Note: The menu "15: REC Mode" and "16: Play Mode" will appear
only when the Voice Recording Unit is installed.
VX-920/-970 S
)
120 seconds), and playback from the
beginning of the message.
opens, and playback of the last 120
seconds.
ceived signal
playback audio
O M
ERIES PERATING ANUAL