User Set Mode - Vertex Standard VX-820 Series Operation Manual

The 16-key and 4-key versions of the VX-820 include
a "User Set (Menu)" Mode which allows the user to
define or configure various settings, such as Beep On/
Off, Squelch Threshold Level, LCD Contrast, etc.
To activate the "User Set (Menu)" Mode:
r Press the assigned programmable key for the
"SET" function to enter the "User Set Mode".
r Select the User Set Mode Item you want change
using the CH selector knob.
r Press the MONITOR/LAMP button to select the
status of the selected item.
r Press PTT switch to exit to normal operation.
VX-820 S O
erieS perating
u s
ser
M
anual
m
et ode
di d
splay esCription
1 SQL Select the Squelch Threshold Level.
2 SCN List Select the Scan List "User" or "Dealer".
3 BEEP Set the Beep On/Off.
4 BELL Set the Bell On/Off.
( Bell engaged by Sub-audible CTCSS/DCS )
5 Lighting Set the BUSY/TX LED On/Off.
6 Lock Set the Lock function to be Locked.
( Key/PTT/Key+PTT )
7 Group Set the Operation Group.
8 SCAN Set the Scan status.
( Same function as Scan key )
9 DW Set the Dual Watch status.
( Same function as DW key )
10 TA Set the Talk Around status.
( Same function as TA key )
11 AF Min VR Set the Minimum Volume level.
12 Beep VR Set the Beep Volume level.
13 Contrast Set the LCD Contrast.
14 Pitch Not available at this time.
15 REC Mode ONE: Enables recording one message (Max.
120 seconds), and playback from the
beginning of the message.
ROL: Enables recording whenever squelch
opens, and playback of the last 120
seconds.
16 Play Mode Set the priority audio on playback mode.
PLY: Playback audio is higher priority than
received signal.
SIG: Received signal is higher priority than
playback audio.
Note: The menu "15: REC Mode" and "16: Play Mode" will appear
only when the optional DVS-5 Digital Voice Storage Unit is
installed.
33