User Set Mode - Vertex Standard VX-P920 Series Operating Manual

The 16-key and 4-key versions of the VX-P920 in-
clude a "User Set (Menu)" Mode which allows the
user to define or configure various settings, such as
Beep On/Off, Squelch Threshold Level, LCD Con-
trast, etc.
To activate the "User Set (Menu)" Mode:
r Press the assigned programmable key for the
"SET" function to enter the "User Set Mode".
r Select the User Set Mode Item you want change
using the CH selector knob.
r Press the MONITOR/LAMP button to select the
status of the selected item.
r Rotate the CH selector knob one click to save the
new setting.
r Press PTT switch to exit to normal operation.
32
u s m
ser et oDe
Di
splay
1 SQL
2 SCN List
3 BEEP
4 BELL
5 Lighting
6 Lock
7 Group
8 SCAN
9 DW
10 TA
11 AF Min VR
12 Beep VR
13 Contrast
14 Pitch
D
esCription
Select the Squelch Threshold Level.
Select the Scan List "User" or "Dealer".
Set the Beep On/Off.
Set the Bell On/Off.
( Bell engaged by Sub-audible CTCSS/DCS )
Set the BUSY/TX LED On/Off.
Set the Lock function to be Locked.
( Key/PTT/Key+PTT )
Set the Operation Group.
Set the Scan status.
( Same function as Scan key )
Set the Dual Watch status.
( Same function as DW key )
Set the Talk Around status.
( Same function as TA key )
Set the Minimum Volume level.
Set the Beep Volume level.
Set the LCD Contrast.
Select the Special Receiver Audio Response.
VX-P920 S O
erieS Perating
M
anual