User.set.mode - Vertex Standard EVX-539 Operating Manual

The EVX-539 includes a "User Set" (Menu) Mode which allows the user to define or configure various settings,
such as Squelch, Display contrast, etc. To activate the "User Set" (Menu) Mode:
 Press the assigned PF key assigned to the "SET"
function.
 Select the User Set Mode item you wish to
change using the [ A ] / [ B ] keys, then use the
SIDE-1/SIDE-2 keys to adjust the setting of the
selected item.
s m I d
Et odE tEm EscrIptIon
SQL Sets the Squelch level.
Beep Enables/Disables the Key Beeper.
Bell
Enables/Disables the Bell function (Alert tone activated by incoming signaling).
Light Enables/Disables the back light of the display and keypad.
Key Enables/Disables the Key Lock function.
PTT
Enables/Disables the PTT Lock function.
DIMMER Sets the LCD Brightness level.
Scan
Engages/Disengages Scanning.
DW
Engages/Disengages Dual Watch.
AF Sets the minimum Audio Volume level.
CONTRAST Sets the LCD Contrast level.
TX Save Enables/Disables the TX Save function.
EVX-539 O M
pErating
u s
sEr
anual
m
Et odE
 Press the [ D ] key to store the new configuration.
You may cancel the selection by pressing the [ C ]
key.
 Press the programmable key assigned to the
"SET" function to exit to normal operation.
a
vaIlaBlE
SQL OP ( Open ) ,
SQL TH ( Threshold ) ,
SQL NM ( Normal ) ,
SQL TI ( Tight )
BEEP ON, BEEP OFF
BELL ON, BELL OFF
LIGHT ON, LIGHT OFF
KEY FRE ( Free ) , KEY LCK ( Lock )
PTT FRE ( Free ) , PTT LCK ( Lock )
DIMM 1, DIMM 2, DIMM 3
SCAN ON,
SCAN FM ( Follow-Me Scan ) ,
SCAN GRP ( Group Scan ),
SCAN OFF
DW ON, DW OFF
AF 000 ~ AF 255
CONTR 00 ~ 15
TXSV ON, TXSV OFF
FCC ID: AXI11154620
IC: 10239A-11154620
v
aluEs
29