Vertex Standard VX-920 Series Operating Manual page 22

G U /D
ROUP P OWN
Press the assigned programmable key to select a dif-
ferent group of channels. Once the desired Group is
reached, rotate the CH Selector knob to select the
desired channel within the selected Group.
You may wish to have the Scanner pass through more
than one Group during the scanning process (nor-
mally, scanning is performed within the current group
only). To include the current Group in the scanning
loop, press and hold in the assigned programmable
key for one second. To remove a Group from Group
Scan, press and hold in the assigned programmable
key again for one second.
Multi-Group Scanning is only possible if you are us-
ing the "User Scan" list. To edit the User Scan list,
press and hold the assigned programmable key for one
second to delete the current Memory Group from the
Scanning. Alternatively, press and hold the assigned
programmable key for one second to delete the Cur-
rent Memory channel from the Scanning. When you
delete a Group or channel, "
pear on the LCD for one second after pressing the
assigned programmable key. To restore a particular
channel to your scanning list, press and hold in the
assigned programmable key again for one second;
20
A
DVANCED
- - - - - SCAN Skip SCAN Skip - - - - -
SCAN Skip SCAN Skip SCAN Skip " will ap-
O
PERATION
- - - - - SCAN Stop SCAN Stop - - - - -
" SCAN Stop SCAN Stop " will appear on the LCD for one sec-
SCAN Stop
ond after pressing the assigned programmable key.
C U /D
HANNEL P OWN
Press the assigned programmable key to select a dif-
ferent channel within the current group.
S
ET
Press the assigned programmable key to activate the
"User Set" (Menu) Mode. See page 23 for details
CALL/RESET
While the DTMF Paging System
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press the assigned program-
mable key, followed by the three digits representing
the Page Call code of the station you wish to call.
Three tones will be heard after the last key is pressed
(the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
While the 2-Tone/5-Tone Paging System
This feature, if enabled, press the assigned program-
mable key to send a 2-tone/5-tone sequential tone.
VX-920/-970 S O M
ERIES PERATING ANUAL