User Set Mode - Vertex Standard VX-7200 Operating Manual

The VX-7200 Series includes a "User Set" (Menu) Mode which allows the user
to define or configure various settings, such as Squelch, Display contrast, etc. To
activate the "User Set" (Menu) Mode:
r Press the PF key assigned to the " SET " function.
r Select the User Set Mode item you wish to change using the [ P1 ] / [ P2 ] keys,
then use the [  ] / [  ] keys to adjust the setting of the selected item.
r Press the [ P1 ] or [ P2 ] key to store the new configuration.
r Press [ A ] key to exit to normal operation.
Display Description
1 SQL Sets the Squelch Level.
2 SCN List Select the "User" or "Dealer" Scan List.
3 BEEP Enables/Disables the Key Beeper.
Enables/Disables the Bell function.
4 BELL
(alert tone activated by incoming subaudible CTCSS/DCS tone)
5 Lighting Enables/Disables the BUSY/TX LED.
6 Lock Set the Control Key Lockout Cofiguration (Key/PTT/Key+PTT).
7 Group
Select the desired Channel Group.
Engages/Disengages Scanning (same as the programmable [ SCAN ] key).
8 SCAN
Engages/Disengages Dual Watch (same as the programmable [ DW ] key).
9 DW
Engages/Disengages Talk Around (same as the programmable [ TA ] key).
10 TA
11 RSSI BEEP Enables/Disables the disabling the RSSI beep.
on: Enables the disabling the RSSI beep.
off: Disables the disabling the RSSI beep.
12 AF Min VR Sets the minimum Audio Volume level.
13 Beep VR
Sets the Beep Volume level.
14 Contrast Sets the LCD Contrast level.
15 Dimmer
Sets the brightness of the backlighting of the key and LCD.
Note: RSSI BEEP operates in APCO Project 25 Digital System.
VX-7200 S
erieS
u
ser
O M
perating anual
s M
eT Ode
27