Vertex Standard VX-920 Series Operating Manual page 26

TA S
CAN
Press the assigned programmable key to toggle the
TA (Talk Around) scan feature "On" and "Off."
While TA scan is proceeding, the VX-920/-970 will
search both the transmit and receive frequencies (the
" " icon will blink on the 16-key and 4-key versions).
When a signal is encountered on the receive frequency,
the VX-920/-970 will pause until the signal disap-
pears (" " icon will appear but not blink). When a
signal is encountered on the transmit frequency, the
VX-920/-970 will check for activity on the receive
frequency every few seconds (interval programmed
by your Dealer).
P D
RIORITY ISABLE
Press the assigned Programmable key to disable the
Priority feature temporarily. Again press the assigned
Programmable key to resume the Priority feature.
B O /O
EEP N FF
Press the assigned Programmable key to disable the
radio beeps temporarily. Again press the assigned Pro-
grammable key to enable the radio beeps.
24
A O
DVANCED PERATION
W
HISPER
Press the assigned Programmable key to increase the
microphone gain; thus you can speak in a low voice
(whisper) temporarily. Again press the assigned Pro-
grammable key to resume normal microphone gain.
D
UTY
Press the assigned programmable key to toggle the
Duty function of the 2-tone/5-tone decoder "On" and
"Off."
When the Duty function is set to"On," the user will
always hear (depending on the sub-audio signalling)
all traffic on the paging channel. The radio will sound
the paging alert when it receives the programmed 2-
tone/5-tone code.
When the Duty function is set to"Off," the user will
NOT hear normal radio traffic on the paging channel.
The radio will sound the paging alert and unmute only
when it receives the programmed 2-tone/5-tone code.
VX-920/-970 S O
ERIES PERATING
M
ANUAL