Vertex Standard VX-920 Series Operating Manual page 24

S T
ELECTABLE ONE
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined tone
table. You can operate using the indicated sub-au-
dible tone in the Selectable Tone mode.
D CH#1 #4
IRECT TO
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
REC/PLAY ( V
OICE
This function allows your radio to record a received
voice message, and to play back the recorded audio.
It requires installation of the optional Voice Record-
ing Unit.
Recording;
Press the assigned programmable key for 1.5 sec-
onds to enable the Voice Recording Mode. When an
incoming signal is received (the squelch opens and
audio passes), the incoming audio will be recorded.
In the 16-key and 4-key versions, the " " icon will
flash during audio recording, and the " " icon will
remain on once recording is complete.
22
A
DVANCED
)
S : O
TORAGE PTION
O
PERATION
Playback;
Press the assigned programmable key momentarily to
play back the last message.
To stop the play-back, press the TOP SEL key.
While playback is proceeding, you may press the [ A ]
key (4-key version) or [ ] key (16-key version) to
jump to the previous message, or press the [ B ] key
(4-key version) or [ # ] key (16-key version) to jump
to the next message. Furthermore, press the [ D ] key
to clear the all messages and stop the play-back.
SQL
You can manually adjust the squelch level using this
function:
Press the assigned programmable key. A tone will
sound, and the current squelch level will appear
on the display.
Press the MONITOR/LAMP button to select the
desired squelch level.
Two seconds after releasing the MONITOR/
LAMP button, the display will revert to the normal
channel indication.
VX-920/-970 S O M
ERIES PERATING ANUAL