Search - GE Security DIGIA II User Manual

24 Digia II
User Manual

Search

Digia II allows you to search through your recorded video by a multitude of search criteria. To search your
video, do the following:
1. Press the Search button on the front panel.
2. The Search menu displays (Figure 17). Choose whether you want to search by time or filters by
highlighting the option next to Search By and pressing Enter. Press up or down to switch the option,
and then press Enter again to set the choice.
Figure 17. Search
3. If you choose Time as your search term, set the date and time you wish to search. Or if you choose
filtered as your search term, choose the starting date and time, and the ending date and time you wish
to search.
4. Select which camera you want to search. You can search any one camera or all cameras.
5. Select whether you want to search for video that has alarms, motion, video loss, or a system event
associated with it by checking the checkbox next to your desired search criteria.
6. Press Search again to start the search.
7. If you have any search results, they will appear on a new page labeled Event list.
8. Use the left or right arrows to navigate through multiple pages.
9. Use the up or down arrows to navigate through entries on a page.
10. Press Export to export any of the lists results. This will take you to the Export menu with the export
start time set according to the event selected. The export end time will be set to the start time plus five
minutes. See
11. Highlight the video you wish to watch and press Enter.
12. The recorded video will display and you can control it through the VCR style controls on the front
panel.
Digia II Menu - Search
Start
End
Search By
Date
From 12-19-2006
Video Loss
System Event
Press SEARCH to Start
Export on page 26 for more information.
Available Video
11-30-2006 06:33:58a
12-19-2006 03:17:42p
Time
Time
TUE 03:12:42p
Camera All
Alarm
Motion