End View - Arrow EH108-A Owner's Manual & Assembly Instructions

Step 4
A17
The door track assembly supports
the sliding doors and reinforces the
front wall. It is made up of three pieces.
1
Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2
Insert four screws from the under-
side only.
Hint: The holes in the top side of the
door track assembly are for fastening
the gable to the top of the front wall in
a later step.
3
Position door slides onto the
legs, from the end of door track
assembly, as shown in the end view.
4
Set this piece aside for later use.

END VIEW

● Parts Needed For ●
Door Track Assembly
6403
STEP
1
118 1/8" 3m
STEP
3
118 1/8"
66769
118 1/8" 3m
NOTE:
Door Track Splice (painted part)
9366
9366
STEP
2
6403
9366
STEP
4
3m
● ● ● ● ● 6403 Door Track Splice (1)
● ● ● ● ● 9366 Door Track (2)
66769
Long Leg
on Top
Short Leg
on Bottom
9366
17