Back Panel Connections; Rs-232 Serial Port Integration Parameters; Accessories & Options - CalAmp 882?EVDO?XXX User Manual

Back panel connections

Panel
Connection
Indicator
ETHERNET RJ-45 Ethernet
USB HOST USB
RESET
PWR LED
Molex 43025-0400
PWR Jack Power – bottom pins
I/O – top pins

RS-232 Serial Port Integration Parameters

Table 2.1 provides the serial cable design information to integrate the 882-EVDO into your
system.
Table 2.1 Standard RS-232 DE-9 Pin out
Pin Name
1 CD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Note: Direction is DTE relative DCE
Table 2.2 Default RS-232 Communication Parameters
Bits Per Second
Data Bits
Parity
Stop Bits
Flow Control
Accessories & Options
Fig. 2.2 882-EVDO Back Panel
Direction Description
«— Carrier Detect
«— Receive Data
—» Transmit Data
—» Data Terminal Ready
System Ground
«— Data Set Ready
—» Request to Send
«— Clear to Send
«— Ring Indicator
115,200
8
None
1
None
Description
Interface for Ethernet connection to devices
Interface for external devices (i.e., memory
drives or GPS devices). ODP use only.
One second hold for unit reset. If held for
at least 4 sec, will reconfigure unit to
factory default settings.
Power indicator
Interface for power plug (9-28VDC)
Interface for Input and Output control lines
ODP use only.
.
Page 13 of 62