Starting the Heater for the First Time
•
Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This
is normal. We recommend opening a window to vent the room.
•
Condensation may appear on the glass each time you start the heater - this is normal.
•
Blue Flames will occur on the heater when it first comes on. After fifteen minutes the flames will turn
a more realistic yellow and orange color.
•
Verify the power backup and control light batteries are installed (see page 37).
Location of Controls
CONTINUOUS
PILOT
GREEN SMART
PILOT
© Travis Industries
An instruction card for
operating the appliance is
attached to the inside. Replace
it for easy reference.
Swing the access door and control cover
down to access the controls on the insert.
BLOWER
HIGH
OFF
LOW
Operation
ACCENT LIGHT
HIGH
OFF
LOW
4100105
ON
REMOTE
OFF
PRG
100-01245_000
29