Technical Characteristics - Atlantic ODYSSEO 2 Maintenance And User Manual

Technical characteristics

Dimensions
Empty weight
Capacity of the tank
Hot water / cold water connection
Corrosion-proof protection
Minimum conductivity of the water
Rated pressure
Permissive excessive operating pressure
Electric connection (voltage / frequency)
Maximum total power input of the appliance
Average power input of the heat pump
Maximum power input of the heat pump
Power output of the heat pump
Power input of the electric backup
Water temperature setting range of the heat pump
Operating temperature range of the heat pump (air temperature)
Vacuum air flow (without duct) (230V)

Speed 1

Speed 2
Admissible head loss in the air circuit without impacting
performance
Noise level**
Acoustic pressure at 2m in the open
Coolant fluid
Nota : R134a GWP (Global Warming Potential) is 1350
Certified performances at an air temperature of 7°C (CDC LCIE 103-15A) and 25Pa** ducting
Coefficient of performance (COP) (230V)
QPr (over 24h) (230V)
Heating time* (230V)
Performance measured at an air temperature of 15°C (CDC LCIE 103-15A) without ducts**
Coefficient of performance (COP) (230V)
QPr (over 24h) (230V)
Heating time* (230V)
Other performances
Max. quantity of water mixed at 40°C (setting at 62°C)
* Tested in a reverberation chamber in accordance with the measurement standard NF EN ISO 3741,
water heaters without accessories, average measurement when heating from a water temperature of 21 to
57°C at an ambient air temperature of 20°C.
** Performances measured when heating water from 15°C to 51°C according to the protocol in the
specifications of the NF Electricity performance brand N° LCIE 103-15A for standalone accumulator tank
thermodynamic water heaters (based on the standard EN 255-3).
This appliance complies with Directives 2004/108/EEC on electromagnetic compatibility and 2006/95/EEC
on low voltage.
(under nominal conditions +15°C)
- 4 -
mm H 1897 x l 591 x D 674
kg 90
L 270
3/4 ' ' M
Impressed current anode
μS/cm 40
kPa 560
Mpa 1
240 V single phase 50 Hz
W 2635
W 425
W 755
W 1660
W 1880
45 to 62 (factory setting =
°C
55°C)
°C -5 to 35
3
m /h 230
3
m /h 390
Pa 25
dB(A) 54
dB(A) 37
-/kg R134a / 1.35
3,1
kWh 0,77
8h19min
3,8
kWh 0,74
7h30min
L 455L