When And How To Use - Getac V110 User Manual

When and How to Use

You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS

Setup Utility.
You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware.

You want to modify some specific settings to optimize the system

performance.
To run BIOS Setup Utility:
Method 1 for Windows 8 models: Open the Charms Bar of Windows.

Click Settings  Change PC Settings  General. Under Advanced
startup, click Restart now. In the boot options menu, click Troubleshoot
 Advanced options  UEFI Firmware Settings. Click Restart to restart
the system and enter UEFI (BIOS).
Method 2 for Windows 8 models: Restart the computer using the Restart

option in Windows Power menu. Or, perform a full shutdown by holding
down Shift while clicking the Shutdown option in Windows Power menu
and then start up the computer. In either way, press the F2 key during
the brief time period – shortly after the computer powers on but before
it begins to load Windows.
For Windows 7 models: Press the F2 key when the prompt appears on

the screen during system startup.
NOTE: The actual setting items on your model may differ from those
described in this chapter.
5-2
Using BIOS Setup