Replacing The Hard Disk Drive - Getac V110 User Manual

Replacing the Hard Disk Drive

1. Turn off the computer and disconnect the AC adapter.
2. Slide the cover latch toward the unlocked position (

up the tab (
3. Using the ribbon strip, first pull the small latch toward the right to

unlock ( ) and then pull the hard disk drive out of the device bay (
4. Noting the orientation, insert the new hard disk drive all the way into
the slot until the small latch clicks into place.
5. When closing the cover, push the tab downward until the cover clicks
into place and then slide the latch toward the locked position (
CAUTION: Make sure the latch is correctly locked, not revealing the
underneath red part.
) to release the cover.
Correct Incorrect (revealing red part)
Expanding Your Computer

) ( ) and then lift

).
).
4-9